The Danchuk Tri-Five Nationals presented by Woody's Hot Rodz

  Home > Suspension > Steering >

Unisteer Power Rack & Pinion - 1955-57 Chevy Big Block, LS1, LSX, ZZ4

Unisteer Power Rack & Pinion - 1955-57 Chevy Big Block, LS1, LSX, ZZ4


 
Additional Photos:


UNI-8010600
Our Price: $864.95

Product Code: UNI-8010600




Qty:  
Description
 

Unisteer Power Rack & Pinions are built using a modified traditional style GM rack & pinion for 1955-57 Chevrolet. The rack is bolted to a 1-piece bracket which mounts where the old steering box and idler arm were mounted on the frame. The rack is machined so that it is more narrow, to match the stock suspension. Black or chrome finish available.

Designed for use on Tri-Fives with a big block motor with headers. (Sanderson & FlowTech are recommended). Other headers may work as well, but may require modifications or a shaft kit with three U-joints. This kit will work with Big Block, LS1, LSX & ZZ4 motors, which the bracket is slightly different by changing the location of the rack for additional clearance for oil pans.

This rack has less travel than the old pitman arm, so the arms are necessary to maintain comparable turning radius. Unisteer pump kits that are built to match this rack & pinion are also available. Unisteer shaft kits are available for small block cars, which consist of two U-joints, DD shafting and a coupler for aftermarket columns or a bearing to reuse the factory column.

Includes rack & pinion, mounting bracket & hardware, and steering arms. Allows 5" of travel, 2-1/2 turns from lock to lock, M14 x 1.5 inner thread ends, 16mm DD pinion, M14 banjo -6AN pressure port size, M16 banjo -6AN return port size. Low flow pump required.

Share your knowledge of this product. Be the first to write a review »