The Danchuk Tri-Five Nationals presented by Woody's Hot Rodz

  Home > Driveline > Clutch Accessories >

1955 Clutch Bell Housing Bracket - Each
1955 Clutch Bell Housing Bracket - Each


 
DAN-340-063
Our Price: $27.95


Availability:: Stock may vary. Please call Mon-Fri 8am-5pm EST for current availability - 855-567-1957
Product Code: DAN-340-063
Qty:

Description
 
Bellhousing Clutch Bracket with Pivot Stud mounts to the bellhousing which supports the clutch cross shaft or "Z" Bar. Includes the pivot stud. #340 will work on any 1955 Chevy model.

Note: The 1955 265 V-8 engine did not have a block mounted canister or spin on oil filter. In that year an oil filter was installed as an option remotely. If you are installing a later model V-8 in your 1955 you will need to purchase the 1956-1957 bell housing bracket #341 as it is modified to clear the canister or spin on filter. You will also need to change your "Z" bar and replace the tab on the frame, the later model "Z" bar uses a larger diameter pivot stud and it is modified to work with the modified bell housing bracket.


NOTE: Stock may vary. Please call for current inventory.
Phone lines are open Mon-Fri 8am-5pm EST

Woody's sells the best products on the market for your Tri-Five. Part numbers listed in our system and catalog are for reference purposes only and make no reference towards manufacturer unless explicitly stated.

Trust the Tri-Five Experts for all your 1955, 1956 & 1957 Chevy Parts.

Share your knowledge of this product. Be the first to write a review »